floor standing wall display cases from Wangda Showcases Limited

10 Dec

floor standing wall display cases

With solid panels as backboard,floor standing wall museum display cases standalone on the floor.This design usually comes in solid back,glass front and glass sides or solid back,solid sides and just one glass front.Solid back is usually applied as shelving system or to secure additional shelving system.Applicable to the 3 ways exhibition or just 1 way exhibition of medium and large artifacts.

Glass Panels—

The glass panels for freestanding wall museum display cases come from 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make display cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option and 6+1.52+6 or even 8+1.52+8 for larger display cases.

Construction Support—

For wall museum display cases,the metal profiles made by dedicated powder-coated aluminum extrusions receive glass panels and secured to the solid steel structure that is constructed by mild/low carbon steel in powder-coating finish.Solid backboard also acts as additional structural support to enhance the stability of display cases.

Inner Invironment—

As inert materials are comprehensively applied for making museum display cases of freestanding wall design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for structural backboard and dressing baseboard are fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts.
Opening Solution—

Under the support of the dedicated pull & slide opening mechanism,the glass panel door(s) can move to left or right optionally for half or full access.No noise comes up when the opening mechanism works.For easy operation,remote control system can be configurated.

Air Tightness—

Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to perfectly create excellent airtightness of museum display cases of freestanding design,i.e.the exchange rate of air between internal and external environment can be less than 0.1 every 24 hours.

Microclimate Control—

To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of freestanding design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower plinth can achieve more precise control on required humidity and temperature in display space of museum display cases.

Lighting System—

Freestanding wall museum display cases usually come with fluroscent,LED or fibre optic lighting system.The fluorescent lighting system is traditionally integrated in the top discrete light chamber with light diffuser to filter UV,IR and isolate heat accumulation from lighting and also to achieve a dimmable illumination.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level.

Lock System—

As the lock system with the highest security level,Abloy cam locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: