Tag Archives: museum vitrinen

Zhangye Museum,China

10 Sep

Zhangye Museum is located in the Giant Buddha Temple, which is the largest architectural relic in Gansu Province, of the Western Xia (1038-1227) period. China’s largest reclining Buddha is well preserved in this temple. Marco Polo spent one year in the town of Zhangye.

Advertisements

National War Museum & National Military History Museum,Malta

10 Sep

Hosted by Fort St Elmo, the National War Museum houses a superb collection of items which takes us back to prehistoric times. Artefacts are displayed in chronological order, commencing from the early phases of the Bronze Age around 2,500 B.C.

During the second Punic war Malta changed hands and became part of the mighty Roman Empire. The disintegration of the latter led to a period of unrest where it is speculated that Malta was subject to vandal attacks. The Eastern Roman Empire officially recognised as the Byzantines, reconquered Malta in 535AD. Little is unfortunately known about life on the islands during Byzantine times as Malta is rarely mentioned in historic documents.

WANGDA sponsors the first MISD forum

30 May

Hosted by the Illumination Association of China and the Museum Association of Beinjing,the first forum for Museum Illumination and Smart Design is held currently in Beijing.National Museum of China,other National-class museums,libraries,art galleries,archives and related suppliers and designers for museum illumination systems,exhibition designers,museum planning institutes and organizations are present.Wangda is invited to be the sole showcases supplier and the particular guest to attend this forum,and supplies all the fine-worked museum display cases to serve the related activities in the forum.

Wangda Showcases Finished Display Case Installation for China Folklore Museum

22 Feb

Wangda Showcases already finished the installation work for all the delivered museum display cases(cabinets,showcases) for China folklore museum located in Beijin.After installation being over,all the high-end museum display cases have already been put into operation to conserve and display the invaluable exhibits of antiques,artifacts,and art works collected in the museum.

 

 

 

 

bevel table display cases from Wangda Showcases Limited

10 Dec

bevel table display cases

Museum table display case with bevel / tilt glass hood .The slope glass hood is seated on an open or closed plinth.Frameless glass hood with glass and solid panels supplies a transparent,front & top viewed and protective showcasing environment.It is applicable to the exhibition of small,medium and flat artifacts such as coins,medals,manuscript,calligraphy and so on.

Glass Panels—

Glass hood for museum display cases of table design is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.Frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass hood elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 is usually proposed.

Construction Support—

For this museum display case of table design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel structure.Solid 25mm thick ZF-MDF and 2mm thick steel panels are used as structural backboard even side boards.Lower steel table structure to support upper part is made of mild/low carbon steel in powder-coating finish.The usual design of table support can be 2 x steel cheek plates or or closed and lockable plinth.Levelling adjusters and master rollers at the feet get table display case more convenient and practical.

Inner Invironment—

As inert materials are comprehensively applied for making museum display cases of table design,no any chemical reaction will take place inside internal environment.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF for dressing baseboard,structural backboard even side boards are fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts.

Opening Solution—

As needed by actual exhibits and exhibition,opening solution can be specified as swing opening for partial access or elevating opening for full access.For easy and secure operation,swing opening is usually additionally supported by 2 gas strut from sides and elevating opening is electrically driven.For larger table display cases,remote control opening can be optionally configurated.

Air Tightness—

Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a perfect airtightness of museum display cases of table design,i.e.the exchange rate of air between internal and external environment can be less than 0.1 every 24 hours.

Microclimate Control—

To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of table design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower chamber can realize more precise control on desired humidity and temperature in museum display cases.

Lighting System—

Lighting system for museum display cases of table design should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.For some special illumination,particular lighting system like swan neck lighting devices can be bespoke on request.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level.

Lock System—

As the lock system with the highest security level,Abloy cam locks or push locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

table display cases from Wangda Showcases Limited

10 Dec

table display cases

Museum display case of table design comes in a full-vision glass hood that is seated on a stable steel table structure.Frameless glass hood with glazed panels for all exposed sides and security construction to supply a transparent,fully-viewed and protective showcasing environment.The simplicity style of table display case is applicable to the exhibition of small,flat,narrow and long artifacts such as documents,coins,medals,manuscript,calligraphy and so on.

Glass Panels—

Glass hood for museum display cases of table design is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass hood elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option.

Construction Support—

For museum display cases of table design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel structure.Lower steel table structure to support upper part is made of mild/low carbon steel in powder-coating finish.The usual design of table support can be 2 x steel cheek plates or 4x square steel legs or closed and lockable chamber.Levelling adjusters and master rollers at the feet get table display case more convenient and practical.

Inner Invironment—

As inert materials are comprehensively applied for making museum display cases of table design,no any chemical reaction will take place inside internal environment.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF baseboard panel is fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts.

Opeing Solution—
As needed by actual exhibits and exhibition,opening solution can be specified as swing opening for partial access or elevating opening for full access.For easy and secure operation,swing opening is usually additionally supported by 2 gas strut from sides and elevating opening is electrically driven.For larger table display cases,remote control opening can be optionally configurated.

Air Tightness—

Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a perfect airtightness of museum display cases of table design,i.e.the exchange rate of air between internal and external environment can be less than 0.1 every 24 hours.

Microclimate Control—

To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of table design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower chamber can realize more precise control on desired humidity and temperature in museum display cases.

Lighting System—

Lighting system for museum display cases of table design should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.For some special illumination,particular lighting system like swan neck lighting devices can be bespoke on request.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level.

Lock System—

As the lock system with the highest security level,Abloy cam locks or push locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

glass top museum display cases from Wangda Showcases Limited

10 Dec

glass top museum display cases

Museum display cases of glass top freestanding design stand on the floor independently.Secured to closed pedestal,the glass hood by 5 glazed panels supplies a transparent,fully-viewed and protective showcasing environment.The freestanding display case of glass top is ideal to showcase artifacts from all direction and is applicable to the exhibition of small,medium and also larger artifacts.

Glass Panels—

The glass hood for glass top freestanding display cases is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass top freestanding display cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option and 6+1.52+6 for larger display cases.

Construction Support—

For museum display cases of freestanding design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel pedestal that is made by mild/low carbon steel in powder-coating finish.The lockable pedestal can be applied for housing necessary accessories such as electrical parts and electronic devices.

Inner Invironment—

As inert materials are comprehensively applied for making museum display cases of freestanding design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for dressing baseboard is fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts.

Opening Solution—

Opening solution for glass hood can be swing opening for max.90° access or electric-driven elevating opening for full access.For easy and secure operation,remote control system can be configurated.

Air Tightness—

Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a perfect airtightness of museum display cases of freestanding design,i.e.the exchange rate of air between internal and external environment can be less than 0.1 every 24 hours.

Microclimate Control—

To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of freestanding design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower chamber of pedestal can realize more precise control on desired humidity and temperature in museum display cases.

Lighting System—

Lighting system for museum display cases of glass top freestanding design should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.Or,external lighting can be applied due to clear glass top.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level.

Lock System—

As the lock system with the highest security level,Abloy cam locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.