bevel table display cases from Wangda Showcases Limited

Museum table display case with bevel / tilt glass hood .The slope glass hood is seated on an open or closed plinth.Frameless glass hood with glass and solid panels supplies a transparent,front & top viewed and protective showcasing environment.It is applicable to the exhibition of small,medium and flat artifacts such as coins,medals,manuscript,calligraphy and so on.

Glass Panels—

Glass hood for museum display cases of table design is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.Frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass hood elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 is usually proposed.

Construction Support—

For this museum display case of table design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel structure.Solid 25mm thick ZF-MDF and 2mm thick steel panels are used as structural backboard even side boards.Lower steel table structure to support upper part is made of mild/low carbon steel in powder-coating finish.The usual design of table support can be 2 x steel cheek plates or or closed and lockable plinth.Levelling adjusters and master rollers at the feet get table display case more convenient and practical.

Inner Invironment—

As inert materials are comprehensively applied for making museum display cases of table design,no any chemical reaction will take place inside internal environment.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF for dressing baseboard,structural backboard even side boards are fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts.

Opening Solution—

As needed by actual exhibits and exhibition,opening solution can be specified as swing opening for partial access or elevating opening for full access.For easy and secure operation,swing opening is usually additionally supported by 2 gas strut from sides and elevating opening is electrically driven.For larger table display cases,remote control opening can be optionally configurated.

Air Tightness—

Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a perfect airtightness of museum display cases of table design,i.e.the exchange rate of air between internal and external environment can be less than 0.1 every 24 hours.

Microclimate Control—

To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of table design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower chamber can realize more precise control on desired humidity and temperature in museum display cases.

Lighting System—

Lighting system for museum display cases of table design should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.For some special illumination,particular lighting system like swan neck lighting devices can be bespoke on request.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level.

Lock System—

As the lock system with the highest security level,Abloy cam locks or push locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

table display cases from Wangda Showcases Limited

Museum display case of table design comes in a full-vision glass hood that is seated on a stable steel table structure.Frameless glass hood with glazed panels for all exposed sides and security construction to supply a transparent,fully-viewed and protective showcasing environment.The simplicity style of table display case is applicable to the exhibition of small,flat,narrow and long artifacts such as documents,coins,medals,manuscript,calligraphy and so on.

Glass Panels—

Glass hood for museum display cases of table design is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass hood elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option.

Construction Support—

For museum display cases of table design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel structure.Lower steel table structure to support upper part is made of mild/low carbon steel in powder-coating finish.The usual design of table support can be 2 x steel cheek plates or 4x square steel legs or closed and lockable chamber.Levelling adjusters and master rollers at the feet get table display case more convenient and practical.

Inner Invironment—

As inert materials are comprehensively applied for making museum display cases of table design,no any chemical reaction will take place inside internal environment.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF baseboard panel is fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts.

Opeing Solution—
As needed by actual exhibits and exhibition,opening solution can be specified as swing opening for partial access or elevating opening for full access.For easy and secure operation,swing opening is usually additionally supported by 2 gas strut from sides and elevating opening is electrically driven.For larger table display cases,remote control opening can be optionally configurated.

Air Tightness—

Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a perfect airtightness of museum display cases of table design,i.e.the exchange rate of air between internal and external environment can be less than 0.1 every 24 hours.

Microclimate Control—

To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of table design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower chamber can realize more precise control on desired humidity and temperature in museum display cases.

Lighting System—

Lighting system for museum display cases of table design should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.For some special illumination,particular lighting system like swan neck lighting devices can be bespoke on request.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level.

Lock System—

As the lock system with the highest security level,Abloy cam locks or push locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

glass top museum display cases from Wangda Showcases Limited

Museum display cases of glass top freestanding design stand on the floor independently.Secured to closed pedestal,the glass hood by 5 glazed panels supplies a transparent,fully-viewed and protective showcasing environment.The freestanding display case of glass top is ideal to showcase artifacts from all direction and is applicable to the exhibition of small,medium and also larger artifacts.

Glass Panels—

The glass hood for glass top freestanding display cases is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass top freestanding display cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option and 6+1.52+6 for larger display cases.

Construction Support—

For museum display cases of freestanding design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel pedestal that is made by mild/low carbon steel in powder-coating finish.The lockable pedestal can be applied for housing necessary accessories such as electrical parts and electronic devices.

Inner Invironment—

As inert materials are comprehensively applied for making museum display cases of freestanding design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for dressing baseboard is fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts.

Opening Solution—

Opening solution for glass hood can be swing opening for max.90° access or electric-driven elevating opening for full access.For easy and secure operation,remote control system can be configurated.

Air Tightness—

Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a perfect airtightness of museum display cases of freestanding design,i.e.the exchange rate of air between internal and external environment can be less than 0.1 every 24 hours.

Microclimate Control—

To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of freestanding design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower chamber of pedestal can realize more precise control on desired humidity and temperature in museum display cases.

Lighting System—

Lighting system for museum display cases of glass top freestanding design should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.Or,external lighting can be applied due to clear glass top.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level.

Lock System—

As the lock system with the highest security level,Abloy cam locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

floor standing wall display cases from Wangda Showcases Limited

With solid panels as backboard,floor standing wall museum display cases standalone on the floor.This design usually comes in solid back,glass front and glass sides or solid back,solid sides and just one glass front.Solid back is usually applied as shelving system or to secure additional shelving system.Applicable to the 3 ways exhibition or just 1 way exhibition of medium and large artifacts.

Glass Panels—

The glass panels for freestanding wall museum display cases come from 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make display cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option and 6+1.52+6 or even 8+1.52+8 for larger display cases.

Construction Support—

For wall museum display cases,the metal profiles made by dedicated powder-coated aluminum extrusions receive glass panels and secured to the solid steel structure that is constructed by mild/low carbon steel in powder-coating finish.Solid backboard also acts as additional structural support to enhance the stability of display cases.

Inner Invironment—

As inert materials are comprehensively applied for making museum display cases of freestanding wall design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for structural backboard and dressing baseboard are fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts.
Opening Solution—

Under the support of the dedicated pull & slide opening mechanism,the glass panel door(s) can move to left or right optionally for half or full access.No noise comes up when the opening mechanism works.For easy operation,remote control system can be configurated.

Air Tightness—

Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to perfectly create excellent airtightness of museum display cases of freestanding design,i.e.the exchange rate of air between internal and external environment can be less than 0.1 every 24 hours.

Microclimate Control—

To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of freestanding design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower plinth can achieve more precise control on required humidity and temperature in display space of museum display cases.

Lighting System—

Freestanding wall museum display cases usually come with fluroscent,LED or fibre optic lighting system.The fluorescent lighting system is traditionally integrated in the top discrete light chamber with light diffuser to filter UV,IR and isolate heat accumulation from lighting and also to achieve a dimmable illumination.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level.

Lock System—

As the lock system with the highest security level,Abloy cam locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

wall mounted / wall hung display cases from Wangda Showcases Limited

With the wall construction as support,wall mounted museum display cases usually means a frameless glass case to be fully hung to the surface of wall or false wall through the dedicated cantilever systems.This design can ideally meet the exhibition space of museums.Full support from the wall immensely ensures the security and stability of the wall mount museum display cases.Usually come in solid back,glass sides and glass front.Solid back can be applied as shelving system or to secure additional shelving system. It is applicable to single way exhibition of small and medium artifacts.

Glass Panels—

The glass panels for wall hung museum display cases adopt 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make display cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option.

Construction Support —

The wall structure supplies enough support for security and stability for recessed wall museum display cases.The metal profiles made by dedicated powder-coated aluminum extrusions receive glass panels and secured to the solid steel structure that is constructed by mild/low carbon steel in powder-coating finish.Solid backboard also acts as additional structural support to enhance the stability of display cases.

Inner Environment—

As inert materials are comprehensively applied for making museum display cases of wall-mounted design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for structural backboard,side boards and dressing baseboard are fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts.

Opening Solution—

For small size of wall hung display cases,usually the hinge mechanism is installed on the top for up-down swing opening solution or the mechanism is installed on sides for left-right swing opening solution.For larger size of wall hung display cases, pull & slide opening solution is applied.

Air Tightness—

Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to perfectly create a minimal airtightness of museum display cases of recessed design,i.e.the exchange rate of air between internal and external environment can be less than 0.1 every 24 hours.

Microclimate Control—

To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of wall-mounted design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.

Lighting System—

Wall hung museum display cases usually come in LED or fibre optic lighting system.As needed by exhibits,the top light chamber can be for option.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level.

Lock System—

As the lock system with the highest security level,Abloy cam locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

wall standing museum display cases from Wangda Showcases Limited

Wall-against museum display cases stand against and secured to wall structure.Enough support from the wall fabric extremely enhances the security and stability of the wall display cases,especially much larger wall cases.This design usually comes in solid back,glass front and glass sides or solid back,solid sides and just one glass front.Solid back is usually applied as shelving system or to secure additional shelving system.Wall-against msueum display cases are applicable to the 3 ways exhibition or just 1 way exhibition of medium and large artifacts.LED downlights and fiber optic lighting system to supply conservational and theatric lighting effect.Microclimate control with relative constant humidity and temperature is realized by active miniclimate control facility of silicon gel tray like Prosorb or Artsorb.

museum display cases / cabibnets / showcases / vitrines from Wangda Showcases Limited

As the first dedicated manufacturer of all glass museum display cases of frameless structure located in China, Wangda Showcases Limited(Tianjin Wangdawenbo Exhibition Products Co.,Ltd.) initiated the professional design,fabrication and installation of museum grade all glass display cases on the basis of manufacturing display and storage facilities for libraries and museums since 1996.Covering an area of 15,000 square meters,equipped with full sets of modern CNC machine tools as well as other metal processing machines to fabricate the metal parts and relevant mechanical parts,having a modern production line for electrostatic powder coating,adopting advanced invisible and framelss glass bonding technology,Wangda is professionalized in building premier quality of all glass museum display cases with multifarious designs for museums, libraries, archives, art galleries, visitor centers, exhibitions and so on

Enthusiastic,conscientious, professional and experienced designers,technicians,workers as well as project management teams are the core of Wangda Showcases Limited and fully guarantee the top quality of display cases and high efficiency of project managment throughout each project,simultaneously,endow museum display cases with endless vitality.The conferred ISO9001-international quality management system certification,ISO14001-the environmental management system certification and GB/T28001-the occupation health and safety managment system certification is the most convincing footnote to the reliable quality and management from Wangda.As a member of Chinese Association of Museums,a director of Beijing Institute of Museums,a member of China Association of Furniture,a member of China Quality Inspection Association,Wangda has always been dedicated to making innovation on design and fabrication technology for building high-tech museum display cases so as to meet more and more critical criterias of protection and conservation for museums.

 

Wangda is consistently committed to bringing museum display cases with reasonable budget,reliable quality,credible reputation,punctual delivery and free warranty to more and more museums, libraries, archives, private collectors, exhibition and so on in the world.Just like a firebird,the Wangda’s logo,Wangda is delicated to making extreme contribution to borderless exchange of art and culture among different countries and perfectly protecting and conserving invaluable ancient and contemporary art,culture,history as well as civilization by supplying reliable high specification museum display cases.The teamwork from Wangda was,is and will for ever be the most powerful support of you. 

 

 

custom-made museum display cases from Wangda Showcases Limited

Special structure of museum display cases can be custom-made on request according to special exhibits or special exhibition.Immense size,abnormal shape like column,trapezoid shape or particular function like zero oxygen environment of museum display cases can all be customized.No any compromise on the security,stability and airtightness come to special display cases.

freestanding display cases

4 Glass sides freestanding museum display cases with top light chamber stand on the floor independently.Secured to closed plinth,the glass hood by 4 glazed panels supplies a transparent,round-viewed and protective showcasing environment.The freestanding display case with top light chamber is ideal to showcase artifacts from 4 directions and is applicable to the exhibition of small,medium and also larger artifacts.

Hello world!

Welcome to WordPress.com! This is your very first post. Click the Edit link to modify or delete it, or start a new post. If you like, use this post to tell readers why you started this blog and what you plan to do with it.

Happy blogging!